View Cart
My Account / Order Status
Help
Physical Therapy Products
Navigation
Close Out!
See our Close Out items here!
(Your shopping cart is empty)
Home
>
Electrical Stimulation
>
EMS & TENS Units
>
EMS TS-1311
Our Price: $129.50
Sale Price: $
89.95
Availability::
Ships in 1 to 2 business days.
Product Code:
TS1311
Qty:
Description
Technical Specs
Sold to patients by
prescription only
. Available to licensed Physical Therapists. Call to order. Digital, premium grade EMS functional neuromuscular stimulator.
Channel:
Dual, isolated between channels
Output Waveform:
asymmetric square pulse
Amplitude:
Adjustable 0~(80±10) mA peak into 500 ohm load each channel
Pulse Rate:
Adjustable, (2±1)Hz~(120±20%)Hz
Pulse Width:
Adjustable, (50±10%) µ~(260±10%) µ s each channel
Pulse Frequency:
Variable, 2~150 Hz
On Ramp: time required to reach the pulse width value and amplitude setup value can be selected to be 1~8 seconds for each channel
Cycle On Time:
Adjustable (1±0.5)~(30±20%) seconds
Cycle Off Time:
Adjustable (1±0.5)~(45±20%) seconds
Mode:
"S"=Synchronous; "C"=Constant; "A"=Alternate
S:
The pulses of Channel 1 and Channel 2 are synchronous. While Ch. 1 is activated, Ch. 2 will be activated simultaneously. The pulses active and inactive duration is controlled by ON TIME and OFF TIME.
C:
Both Ch. 1 and Ch. 2 are continuous pulses under an adjustable pulse rate. The functions of ON TIME, OFF TIME, and RAMP are all disabled.
A:
The pulses of Ch. 1 and Ch. 2 are Alternative. When Ch. 1 is activated, Ch. 2 will be inactivated and vice versa.
Battery:
One 9 volts battery (alkaline)
Low battery indicator flashes to signify that the battery should be replaced soon. However, the stimulator will continue to operate for several more hours.
Size:
59mm length X 100mm height X 24mm depth
Operation ambient temp. range:
10?C to 35?C (?50?F to 95?F)
Operation ambient humidity range:
20 to 90%RH
Storage & Transportation temp. range:
0 to 70?C (?32?F to 158?F)
Storage & Transportation humidity range:
20 to 90%RH
Safety Standard:
DIN EN60601-1, DIN EN60601-1-2 (EMC test), IEC 60601-2-20 (partly applied)
Amplitude Controls:
controls the "INTENSITY" level of stimulating pulses. These controls located at the top of the unit regulate the amplitude, or intensity, of the stimulation and are the ON/OFF CONTROL. The ON indicator signal will stay lit as long as the unit is working, and it mimics the output of the electrical pulse.
Mode Selector Control:
under the lid cover. It offers the mode status from five types of funtion modes which are Synchronous, Constant, and Alternate.
increase control button (triangle button):
This button will carry on the increase character to increase the pulse width from 50~260µs, and to increase the pulse rate from 2 to 150Hz, and to increase the timer from 50 to 90 min.
decrease control button (inverted triangle button):
This button will carry on the decrease character to decrease the pulse width from 260~50µs, and to decrease the pulse rate from 150 to 2Hz, and to decrease the timer from 90 to 5 min.
Browse for more products in the same category as this item:
Electrical Stimulation
>
EMS & TENS Units
Advertised Specials
>
Electrical Stimulation
Electrical Stimulation
Advertised Specials
PTmart Inc
12310 E. 60th St
Tulsa, OK 74146-6903
About Us
Privacy Policy
Send Us Feedback
Bookmark Us
Company Info
|
Advertising
|
Help
|
Terms of Use
|
Product index
|
Category index
Copyright © 2002 PTmart Inc. All Rights Reserved.
Built with
Volusion
Volusion
Volusion